All Feedback Sports and Ultimate stands have used the same black and red clamp jaws. The two jaws are slightly different so you will have to match the jaw c...

Due to the differences in shape and hardware supplied with replacement clamp jaws, the two are not interchangeable. Please make sure your specify which colo...

If you need to perform maintenance on the Pro Elite head you may need to remove the roll pin. To remove the roll pin you can watch this video.  Note: ro...

If you feel you need to upgrade your tri-pod to have a new head they can be purchased from our website by clicking the pictures below. Spinner Knob ...

Using a small pokey tool remove the red button Use an 8mm socket or Phillips head to remove the  stop-screw Un-thread the tri knob Remove the head...

First off, that’s a great question and a great idea. Unfortunately, the two stands are not modular and cannot be swapped back and forth.  The Sprint and the...

While the our repair stands may work for some trikes our friends at Sports Crafters offer a modified Sprint stand specifically designed for trikes. You ...

If you’re looking down at the base of your stand with the clamp assembly folded out for use, it is advisable to position one of the legs angled slightly for...

The serial number on the Pro Elite is a white sticker located under one of the legs. This is the same for all of our repair stand with the exception of the ...

Unfortunately we cannot recommend that you attempt to install a secondary clamp assembly on your stand. By doing so, you are changing the balance point of t...